page 1 of 2 high power, dc pass key features feature advantages wideband, 650 to 2750 mhz this model covers a variety of popular wireless communications bands, making it suit - able for a wide range of applications. high power handling: ? 100w as a splitter ? 3w as a combiner supports a wide range of power requirements. low insertion loss, 0.9 db the combination of 100w power handling and low insertion loss makes this model a suitable candidate for distributing signals while maintaining excellent transmission of signal power. low unbalance: ? 0.4 db amplitude unbalance ? 4? phase unbalance produces nearly equal output signals, ideal for parallel path / multichannel systems. high isolation, 25 db minimizes interference between input ports. dc passing, 1.2a (200ma each port) supports applications where dc power is needed at later stages in the system. case style: aw257-2 the big deal ? high power, up to 100w as a splitter ? low insertion loss, 0.9 db ? good isolation, 25 db product overview mini-circuits ZN6PD-272HP+ is a 6-way 0? high-power splitter/combiner providing up to 100w rf input power handling as a splitter and 3.0w as a combiner across the 650 to 2750 mhz frequency range. its outstanding combination of high power handling and low loss minimize power dissipation and provide excellent signal fdelity from input to output. the splitter/combiner comes housed in a rugged aluminum alloy case measuring 8.08 x 3.25 x 2.38 and is available with your choice of sma or n-type connectors and optional heat sink. zn6pd- 272hp+ 6 way-0 50 ? up to 100w 650 to 2750 mhz power splitter/combiner ZN6PD-272HP-s+ ZN6PD-272HPx-s+ notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 2 of 2 electrical specifcations at 25c maximum ratings coaxial connections sum port s port 1,2,3,4,5,6,7,8 1,2,3,4,5,6 operating temperature -55c to 60c storage temperature -55c to 100c power input (as a splitter 1 ) 100w max. internal dissipation 3.0w max. dc current 1.2a (200ma for each port) outline drawing outline dimensions ( ) inch mm ZN6PD-272HP+ power splitter/combiner rev. or m152243 ZN6PD-272HP+ ed-17251/1 jc/cp/am 150923 high power, dc pass case style: aw257-2 connectors model sma ZN6PD-272HP-s+ sma ZN6PD-272HPx-s+ n-type ZN6PD-272HP-n+ n-type ZN6PD-272HPx-n+ features ? power handling up to 100w ? wideband, 650 to 2750 mhz ? low insertion loss, 0.9 db typ. ? good isolation, 25 db typ. ? rugged shielded case applications ? wimax ? lte ? wcdma 7.5 8.0 8.5 9.0 9.5 650 1175 1700 2225 2750 total loss (db) frequency (mhz) zn6pd - 272hp+ total loss s-1 s-3 s-5 1.0 1.1 1.2 1.3 1.4 650 1175 1700 2225 2750 vswr frequency (mhz) zn6pd -272hp+ vswr vswr s vswr out electrical schematic (dc through) port s rf+dc port 1 rf+dc port 2 rf+dc port n rf+dc 20 28 36 44 52 650 1175 1700 2225 2750 isolation (db) frequency (mhz) zn6pd - 272hp+ isolation 1--2 2--3 3--4 4--5 6 way-0 q 50 : up to 100w 650 to 2750 mhz permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 7.8db theoretical splitter loss. parameter frequency (mhz) min. typ. max. unit frequency range 650 2750 mhz insertion loss (above theoretical 7.8 db) 650-2750 1.0 1.6 db 700-2700 0.9 1.4 isolation 650-2750 18 23 db 700-2700 20 25 phase unbalance 650-2750 4 10 degree amplitude unbalance 650-2750 0.4 0.7 db 700-2700 0.3 0.6 vswr (port s) 650-2750 1.35 1.55 :1 700-2700 1.30 1.5 vswr (port 1-8) 650-2750 1.15 1.30 :1 power handling as splitter 1 650-2750 100 watt as combiner 2 650-2750 3.0 1. all outputs must terminate 50 ohm (vswr 1.5:1 or better) 2. as a combiner of non-coherent signals, max. power per port is 3.0 watt power rating divided by number of ports. m o u nti n g i n f o r m a t i o n for m o d els w i tho u t h e a t s i n k a b c d e f g 8.06 3.25 2.38 .125 7.560 2.625 .144 204.72 82.55 60.45 3.18 192.02 66.68 3.66 h j k l m n wt .890 .44 7.06 .88 3.13 .75 grams* 22.61 11.18 179.32 22.35 79.50 19.05 1240 *850 grams without heatsink ZN6PD-272HP-s+ ZN6PD-272HPx-s+ frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbal. (deg.) vswr s vswr outputs s-1 s-3 s-5 adjacent opposite 650 8.31 8.21 7.93 0.38 22.50 22.35 0.62 1.39 1.08 700 8.22 8.13 7.85 0.37 25.54 25.14 0.68 1.12 1.06 850 8.29 8.20 7.94 0.35 25.88 24.86 0.96 1.24 1.10 1000 8.30 8.21 7.96 0.35 43.12 39.30 1.00 1.17 1.11 1150 8.34 8.25 7.99 0.35 27.41 28.62 1.19 1.21 1.06 1300 8.36 8.28 8.03 0.33 28.87 29.24 1.31 1.11 1.03 1450 8.39 8.32 8.08 0.31 43.55 42.17 1.40 1.14 1.10 1600 8.46 8.40 8.16 0.29 27.59 26.48 1.48 1.23 1.12 1800 8.55 8.49 8.26 0.29 23.65 22.60 1.70 1.26 1.12 1900 8.57 8.51 8.28 0.28 24.11 22.93 1.84 1.25 1.09 2000 8.57 8.50 8.28 0.28 27.79 26.20 1.82 1.22 1.09 2200 8.65 8.59 8.36 0.28 24.43 24.99 1.61 1.26 1.14 2400 8.61 8.56 8.40 0.20 33.75 31.00 1.39 1.05 1.04 2500 8.62 8.60 8.46 0.16 35.06 33.65 1.44 1.06 1.03 2600 8.65 8.66 8.54 0.16 28.92 28.30 1.39 1.13 1.04 2750 8.72 8.77 8.70 0.26 29.56 26.67 1.21 1.26 1.01 typical performance data notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
